How to set up a server with Apache , PHP , MySQL , Perl , phpMyAdmin (pdf document) free file download at fliiby.com

"How to set up a server with Apache , PHP , MySQL , Perl , phpMyAdmin ===== Let’s start by installing apache (http server) . you can download the apache installer on www.apache.org . download the verion you like , even thought , in win systems i recomand verion 2 (this tutorials is for apache 2) . here is a link for it : Code: http://apache.mirror.nedlinux.nl/dist/httpd/binaries/win32/apache_2.0.52-win32-x86-no_ssl.msi for a faster mirror , visit http://httpd.apache.org/download.cgi . After downloading the file (.msi installer) , run it . The installation wizard is a next , next , finish ’work’ ... The installer will ask you some details like your server name , your server adress and the admin’s mail adress . if you have a domain name or a hostname , enter the info’s like this : Code: Server Name : your_domain.org Server Adress : www.your-domain.org Admin Email : admin@yourdomain.org if you don’t have one , you should get on e free at : Code: http://www.no-ip.org/ Check the ’Run as a service for all users on port 8080’ option and click next , finish to fiinish the instllation . Advice : Install it in c: (he creates a folder for it , don’t worry) to make sure you configure it easyer . If you are finished , open up a browser and write in the adress bar : Code: http://localhost/ If you will see a ’Test Page for Apache Installation’ , everything works . ===== Let’s install PHP . download the archives from www.php.net . Here is a direct link for verion 4.3.9 : Code: http://nl.php.net/get/php-4.3.9-Win32.zip/from/this/mirror Make sure you download the archive and not the installer . Ok! after downloading it , extract the archive in c:/php (this is to simplify paths) . Now , open up c:/apache/conf/httpd.conf and search for this line : Code: #LoadModule ssl_module modules/mod_ssl.so under that line , add this : Code: LoadModule rewrite_module modules/mod_rewrite.so LoadModule php4_module "c:/php/sapi/php4apache2.dll" AddType application/x-httpd-php .php AddType application/x-httpd-php .php3 AddType application/x-httpd-php .php4 Now search for this line : Code: <Directory "C:/Apache2/htdocs"> Change : Code: Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None into : Code: Options Indexes Includes FollowSymLinks MultiViews ExecCGI # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride All This will allow .htaccess support on your server and make sure you can see the content of a folder without getting a 403 forbidden error . Now search for : Code: DirectoryIndex index.html index.var.html and change it into : Code: DirectoryIndex index.html index.php Save the file and restart apache . (you can restart it by pressing the Restart apache server shortcut in the start menu or by writing : Code: net apache restart in a command prompt window . Ok! you have php working for your server icon_wink.gif . Now let’s configure php and make sure it really works ! Open up c:/php/php.ini (php.ini-dist renamed) and search for this paragraph : Code: max_execution_time = 60 ; Maximum execution time of each script, in seconds max_input_time = 60 ; Maximum amount of time each script may spend parsing request data memory_limit = 5M ; Maximum amount of memory a script may consume (8MB) you should change this to whatever you want . here is an option i use : Code: max_execution_time = 300 ; Maximum execution time of each script, in seconds max_input_time = 300 ; Maximum amount of time each script may spend parsing request data memory_limit = 5M ; Maximum amount of memory a script may consume (8MB) Now search for : Code: register_globals = Off and change it into : Code: register_globals = On Search for : Code: extension_dir = ".\" and change it into : Code: extension_dir = "c:/php/extensions" assuming you have installed php in c: ... Search for : Code: ;Windows Extensions ;Note that MySQL and ODBC support is now built in, so no dll is needed for it. and uncomment (delete the ; in the front) the following modules : Code: extension=php_bz2.dll extension=php_db.dll extension=php_gd2.dll extension=php_java.dll extension=php_msql.dll extension=php_pdf.dll extension=php_pgsql.dll extension=php_sockets.dll Ok! now let’s change the smtp settings (this is good icon_smile.gif for you mail() function . you need this !!!) Search for : Code: [mail function] ; For Win32 only. SMTP = smtp_port = 25 ; For Win32 only. ;sendmail_from = and change to : Code: [mail function] ; For Win32 only. SMTP = mail.isp.org smtp_port = 25 ; For Win32 only. sendmail_from = mail@your_domain.org if you don’t have a mail server or : Code: [mail function] ; For Win32 only. SMTP = localhost smtp_port = 25 ; For Win32 only. sendmail_from = mail@your_domain.org if you have a mail server ... Save the files . Now let’s finalize the php installation . copy all the dll’s from c:/php/dlls into c:/windows/system32 . copy c:/php/php4ts.dll into c:/windows/system32/ and copy php.ini from your folder php into windows and system32 folder . restart apache . open up notepad and add this into the file : Code: <?php phpinfo(); ?> save this file in your htdocs folder (c:/apache/htdocs) as info.php and open up a browser . in the adress bar write : Code: http://localhost/info.php you should see php’s configuration in a table . a looong file icon_smile.gif you can optionaly install zend optimizer . i am using it ... it doesn’t needs a tutorial . to install the PEAR modules for php , just run the go-pear batch from the php folder and 2click the reg file to finish the instllation . ===== let’s install mysql . download mysql from http://www.mysql.com/ . this tutorial applyes to verion 4.0.* ... i don’t recomand using mysql 4.1 . here is a direct link : Code: http://dev.mysql.com/get/Downloads/MySQL-4.0/mysql-4.0.22-win.zip/from/http://mysql.proserve.nl/ after downloading , extract the arhive somewhere and run the setup.exe . install mysql in c:/mysql and complete the installation . open up command prompt and write this : Code: cd mysql cd bin mysqld-max-nt --install this will install mysql as a service . recomended . now you would probably consider downloading mysql control center . a gui tool to administrate the server in a graphical mode . here is a link : Code: http://dev.mysql.com/get/Downloads/MySQLCC/mysqlcc-0.9.4-win32.zip/from/http://mysql.proserve.nl/ install it like any other program and run the shortcut in the desktop . a window will pop-up . it will ask you to add a new connection . here are the info’s you need to fill in : Code: name : localhost or main or whatever :) host : localhost user : root pass : click add , expand the databases menu and delete databse text . now expand the users menu and delete all users except root@localhost . right click it and select edit user . change it’s password to whatever you want icon_smile.gif now right click the server and select edit . change the password to the pass you chosed for user root . as easy as that . mysql is installed ! ===== phpMyADmin . you can download it from http://www.phpmyadmin.net/ . i recommend using verion 2.5.1 pl1 . the last verion is still bugy icon_smile.gif download , unzip the contecnt into a folder in htdocs (phpMyAdmin) and open up config.inc.php with a text editor . search for : Code: $cfg[’PmaAbsoluteUri’] = ’’; change it to your phpmyadmin url . eg. : Code: $cfg[’PmaAbsoluteUri’] = http://www.your_domain.org/phpMyAdmin/’; now search for : Code: $cfg[’blowfish_secret’] = ’’; and change it to your mysql root password like this : Code: $cfg[’blowfish_secret’] = ’password’; now search for : Code: $cfg[’Servers’][$i][’auth_type’] = ’config’; and change it to : Code: $cfg[’Servers’][$i][’auth_type’] = ’cookie’; save and exit . that’s it ! phpMyAdmin works icon_wink.gif ===== Perl . Optioanl for your server , very usefull . i recomend you to install it . you can download it from http://www.activestate.com/ . here is a direct link : Code: http://downloads.activestate.com/ActivePerl/Windows/5.8/ActivePerl-5.8.4.810-MSWin32-x86.msi download , install and you are ready . put your perl scripts in the /cgi-bin/ folder (c:/apache/cgi-bin) . ===== Hope this helped , you’re welcome . No , you don’t need to pay This is a demo version of txt2pdf PRO v.9.2 Developed by SANFACE Software http://www.sanface.com/ Available at http://www.sanface.com/txt2pdfPRO.html ..."

You need to upgrade your Flash Player , or try to enable javascript in order see this document properly.